Year-End Workplace Safety Guidelines Every Organisation Should Review

Image for illustration purposes only
A year-end workplace safety review is a management exercise that pulls a year of incident reports, inspection findings, training records and unfinished corrective actions into one place, so an employer can set a small number of priorities for the year ahead. It is not an audit, and it is not a statutory requirement. It is the one point in the year when information that normally sits in separate files can be read together.
That matters because most safety problems are visible in the records long before they are visible on the floor. Three reports about blocked aisles are not three housekeeping lapses. They are a storage layout problem that nobody has owned yet.
This review has a second purpose in 2026, which it did not have in most years. Several OHSA obligations changed during the year, and at least one of them is a records requirement that an employer either has been meeting since January or has not. A year-end review is where that gets caught, while it is still a gap rather than an order.
Why year-end reviews matter
An annual review is a useful management exercise. It does not replace the inspections, reporting and other duties that run throughout the year, and it is worth being clear about that at the outset so the review does not become an excuse to defer anything.
Identify recurring hazards
Look for problems that appear in more than one record. Compare incidents against near misses and inspection notes, then ask workers whether the same issue keeps returning between inspections. The pattern is usually in the overlap rather than in any single report.
Evaluate existing procedures
A procedure written for last January’s operation may not fit December’s staffing or equipment. Check whether workers can follow it during normal production, not during a demonstration. If a safe lifting procedure assumes two people and shifts now run with one, the procedure and the staffing arrangement both need attention, and fixing only the document fixes nothing.
Prepare for the year ahead
Turn findings into a short list. Assign an owner, a realistic completion date and a way to verify the result. Separate urgent hazards needing immediate attention from longer-term improvements such as redesigning a loading area. Do not postpone a serious risk because the annual review is not finished.

Image for illustration purposes only
What changed in 2026, and what to check before January
Four OHSA developments in 2026 create work that a year-end review should pick up.
Washroom cleaning records, in force since 1 January 2026. Under O. Reg. 480/24 an employer or constructor that provides washroom facilities must keep a record of cleaning, and the record must be posted, either conspicuously in or near the washroom where workers will see it, or electronically with workers told how to access it. It shows the date and time of the two most recent cleanings. This applies to all workplaces, not only construction.
Two dates matter here. The duty to keep washrooms clean and sanitary has applied since 1 July 2025. Only the records duty starts on 1 January 2026. An employer who has been cleaning diligently all year and posting nothing is not compliant, because posting is the obligation.
Construction clients have a second, separate requirement that is easy to miss. From the same date, O. Reg. 482/24 requires the constructor to keep at the project a record of servicing, including cleaning and sanitizing, showing the date of all services for the past six months or the duration of the project, whichever is shorter.
Accredited safety management systems became equivalent to each other, for one purpose. This one is worth stating precisely, because it is widely overstated. Subsection 7.6.1(4) of the OHSA and O. Reg. 364/25 provide that health and safety management systems accredited by the Chief Prevention Officer are equivalents, and O. Reg. 364/25 confines that to procurement: where an accredited system is required as a condition of bidding for or carrying out construction work for the Government of Ontario or a listed public body, all accredited systems must be treated as equivalent, including in bid evaluation.
What it does: a public-sector buyer of construction work can no longer demand one named accredited system and exclude another. If you bid that work, that is a real change and it is worth knowing.
What it does not do: it does not make an accredited system equivalent to compliance with the OHSA, it does not substitute for any statutory duty, and it does not bind private-sector buyers. Anyone telling you the Act now treats accreditation as compliance is reading it too generously. Supporting Ontario’s Safe Employers is the provincial programme under which systems are accredited.
Automated external defibrillators on construction projects. Section 27.1 of O. Reg. 213/91, added by O. Reg. 157/25, requires a defibrillator where twenty or more workers are regularly employed at a project. Read the duration threshold carefully, because it is commonly stated backwards: the section does not apply where the work is expected to last less than three months. A project expected to run exactly three months is covered.
The requirement is more detailed than the headline suggests. The unit must be a licensed medical device. It must be stored with a prescribed kit of six items, a CPR mask, scissors, two pairs of disposable medical-grade gloves, a disposable razor, a garbage bag and four absorbent towels. It must be protected from dust and moisture, and outdoors from extreme temperatures and direct sunlight. Signage carrying a prescribed symbol and wording goes next to the unit and at other locations across the project. It must be inspected quarterly by a competent worker, with a signed inspection record kept with it.
And a worker trained in cardiopulmonary resuscitation and defibrillator operation must be present at all times when work is in progress. That is the scheduling problem, not the purchase.
The administrative monetary penalty framework came into force, and it is narrower than it sounds. Part IX.1 of the OHSA, section 69.1, took effect on 27 November 2025, and O. Reg. 365/25 followed on 1 January 2026. The framework lets an inspector issue a penalty rather than lay a charge.
But O. Reg. 365/25 prescribes exactly one penalty, for exactly one contravention: a public-sector buyer breaching the construction procurement equivalency rule above, at the lesser of $100,000 or ten per cent of the value of the procurement contract. As at the e-Laws currency date there are no amendments. There is no administrative penalty for general OHSA contraventions today.
The mechanics are worth knowing, because the framework is built to be expanded by regulation. An application for review goes to the Ontario Labour Relations Board within fifteen days, and the Board may confirm, vary or set aside the notice. A notice cannot be issued more than one year after the contravention came to the inspector’s knowledge. The Minister may publish the name, the contravention and the amount. And section 69.1(11) provides that a person who pays cannot be charged under the Act in respect of the same contravention.
One related duty sits under the Workplace Safety and Insurance Act, 1997 rather than the OHSA, and it is easy to conflate with OHSA reporting. Subsection 21(1) requires an employer to notify the WSIB within three days after learning of an accident that necessitates health care or results in the worker not being able to earn full wages. The WSIB administers this as three business days, running from when the employer learns of the reporting obligation, and does not require a report where only first aid was provided. Those are policy glosses on the statutory words, not the words themselves, which is worth knowing if you are ever arguing about a late report. WSIB reporting and OHSA notice are separate duties with separate deadlines and separate recipients, and meeting one does not meet the other.
For the wider legislative picture, our guide to what the Working for Workers Seven Act means for Ontario employers covers the broader package, and the JHSC certification changes that took effect in July 2026 change how lapsed committee members recertify.
Review workplace incidents and near misses
Start with the reports already collected during the year. A near miss is an event that could have caused harm but did not, and it is the cheapest data a safety programme ever generates. Both injury reports and near misses show where controls are failing. Investigations should establish causes and prevent recurrence rather than establish who was at fault, because a programme that produces blame stops producing reports.
Identify patterns
Sort records by location, task, shift, equipment and contributing conditions. Do not rely on injury counts alone. A warehouse might have repeated reports of workers stepping into lift truck travel routes with no collision recorded. That pattern deserves a hard look at traffic separation, visibility and how materials are staged, and it will never appear in an injury total.
Evaluate previous corrective actions
A closed action is not an effective action. Check what was changed, whether the change is still in place, and whether the problem has returned. If workers were reminded to take care at a blind corner, consider whether the layout, the sightlines or the traffic controls should have changed instead. A reminder is the weakest control available and it degrades within weeks.
Know what the law actually requires, and when
Reporting duties are the part of a year-end review most likely to turn up a gap, because the deadlines are short and the recipients differ by severity. Part VII of the OHSA sets them out.
Section 51 covers a death or critical injury at the workplace. Note the trigger is a person, not a worker, so a visitor or a contractor killed or critically injured engages it on the same terms. The employer and the constructor, if any, must give immediate notice by telephone or other direct means to a Ministry inspector, to the joint health and safety committee or health and safety representative, and to the trade union if there is one. A written report must then go to a Director of the Ministry within 48 hours.
Subsection 51(2) is the one employers breach most often, usually within the first hour and usually while trying to help. The scene must not be disturbed, subject to the exceptions the section sets out. If your incident procedure does not say that in plain words, it is the first thing to fix.
Section 52 covers an accident, explosion, fire or incident of workplace violence where a person requires medical attention or cannot do their usual work, and nobody has been killed or critically injured. Written notice goes to the committee or representative and to the union within four days of the incident, and to a Director if an inspector requires it. Section 52 also covers occupational illness: once an employer is informed that a worker has an occupational illness, or that a WSIB claim has been filed for one, written notice must go within four days to a Director, to the committee or representative, and to the union. That duty extends to former workers, which is the provision employers most often do not know about.
Section 53 covers specified occurrences including an unexpected explosion, fire, flood, equipment failure, cave-in or subsidence, whether or not anyone was hurt. Written notice goes within two days, to a Director and to the committee or representative and the union.
There is an exception where a section 51 report or a section 52 notice has already gone to a Director, and it is narrower than it looks. It removes only the notice to the Director. The notice to the committee, the health and safety representative and the union is still required. Reading the exception as covering everything is a straightforward way to miss a notice you owe.
Three different deadlines, three different sets of recipients. What each notice must contain has been prescribed by O. Reg. 420/21 since 1 July 2021, which also defines critically injured, permits electronic submission, and requires each notice or report to be kept for at least three years. An investigation should not wait for year-end, and hiring a consultant does not transfer any of these obligations. The Ontario page on reporting workplace incidents and illnesses covers the practical process, and Part VII of the Guide to the OHSA covers the provisions themselves.
When to bring in outside investigation support
Independent support helps when an event has several contributing factors, when reports disagree about what happened, or when similar incidents continue after corrective actions. An outside reviewer can examine evidence without the internal history of who proposed which control, which is usually the reason an investigation stalls.

Image for illustration purposes only
Review hazard assessments and inspections
Reassess existing hazards
Walk the tasks that changed since the last assessment. New racking, revised delivery schedules, unfamiliar cleaning chemicals or a different shift pattern all change exposure. Speak with the workers who use the equipment and watch how the job is actually performed rather than how the procedure says it is. A hazard assessment should produce decisions about work, not another signed form.
New racking deserves particular attention, because it can carry a pre-start health and safety review obligation that nobody budgets for. Item 3 of the Table to section 7 of Regulation 851 catches material placed or stored on a rack or stacking structure, and the exemption applies only where the structure is designed and tested for use in accordance with current applicable standards.
The part worth checking at year end is not the exemption but the paperwork behind it. Subsection 7(8) requires the documentation establishing the exemption to be kept readily accessible for as long as the structure remains in the workplace, and subsection 7(9) requires it to be given to the committee or representative on request. An employer relying on the exemption with nothing on file is relying on nothing. Our warehouse peak season guide works through the provisions in detail.
Check inspection records
Review recurring findings, overdue repairs, and anything marked complete without evidence. Check walking surfaces, entrances, exits, machine guarding, storage areas, lighting and maintenance records as they apply to the operation, and compare the written findings against conditions on the floor.
Two Regulation 851 provisions are worth running the checklist against directly, because both are commonly breached in winter and both are prescribed rather than general duties. Section 11 requires that a floor or other surface used by any worker be kept free of obstructions, hazards and accumulations of refuse, snow or ice, and that no finish or protective material likely to make the surface slippery be used on it. Section 21 requires artificial lighting where natural lighting is inadequate to ensure a worker’s safety, with shadows and glare reduced to a minimum.
Where a workplace has a joint health and safety committee, inspection responsibilities are shared. Subsection 9(2) of the OHSA requires a committee where twenty or more workers are regularly employed, and also where a section 33 designated-substance order is in effect or a designated-substances regulation applies, so headcount is not the only route in. Section 8 requires a health and safety representative where the number of workers regularly exceeds five, selected by the workers from among workers who do not exercise managerial functions. The Ontario guide for health and safety committees and representatives sets out how those inspections work. A year-end review runs alongside them, not instead of them.
Evaluate existing controls
Ask whether a control prevents exposure or merely reminds workers to avoid it. A marked pedestrian lane offers little protection if pallets routinely cover the markings. Check whether the route stays open in practice, and whether physical separation is needed where equipment and people interact. Independent workplace inspections and audits are useful here precisely because an outside inspector sees the pallets.
Evaluate training and awareness
Review training records
Match records to current duties. Who operates equipment, handles hazardous products, supervises new hires, or responds to emergencies? Confirm what instruction has been completed and whether anything legally required or task-specific is outstanding.
O. Reg. 297/13 sets the floor. Every worker and every supervisor requires basic occupational health and safety awareness training, regardless of employment status, with no probationary period during which it does not apply. Section 4 requires the employer to maintain a record of the training it has provided, so the record itself is a compliance item and not just good practice. A worker who previously completed a program can be exempted under subsection 1(2), but only on proof of completion plus the employer’s own verification that the content meets the seven topics prescribed in subsection 1(3).
Committee certification is the other records item worth checking now. Subsection 9(12) provides that, unless otherwise prescribed, at least one member representing the constructor or employer and at least one representing workers must be certified. Certification requires two courses, and Part 2 must be completed within twelve months of Part 1, so a member who did Part 1 in the spring has a deadline. PHASCORP delivers CPO-approved JHSC certification for Parts 1 and 2 and the Refresher.
Identify training gaps
Use incidents and observations to test whether training worked. If several workers bypass the same procedure, find out why before scheduling more training. The instruction may be unclear, the equipment may have changed, or production demands may make the written method impractical. Another session will not fix any of those three.
Reinforce responsibilities
Supervisors should be explicit about what workers need to report and how concerns will be handled, then report back on what was done. A programme where raising a concern visibly leads somewhere generates more reports, which is the outcome you want.

Image for illustration purposes only
Review policies, emergency procedures and equipment
Check that policies name current roles, processes and reporting contacts. Remove instructions for equipment no longer in use, and review procedures after any operational change. Clause 25(2)(a) of the OHSA requires an employer to provide information, instruction and supervision to protect a worker, and clause 25(2)(h) requires every precaution reasonable in the circumstances. The Guide to the OHSA, Part III is the reference for separating legal obligation from internal practice, which is the distinction most policy documents blur.
Then walk through the emergencies the site is actually exposed to. Can workers identify exits and assembly points? Are contact details current? Are first aid supplies suitable for the workplace and its headcount? Check specifically whether new hires, contractors and evening-shift workers know what to do, because emergency procedures are usually taught once, during a day-shift orientation.
Read inspection logs, service records and outstanding work orders together rather than separately. A repeatedly failing dock door or a damaged pallet jack signals a maintenance problem that deserves more than another temporary repair. Confirm that equipment taken out of service cannot be returned to use until it is safe, and that the mechanism for that is physical rather than a note.
Strengthen the safety culture for the coming year
A useful review asks not only what went wrong, but whether people felt able to report it. Workers stop mentioning small problems when earlier reports went nowhere, and the first sign of that is a falling near-miss count, which is easy to mistake for improvement. A programme with fewer reports and the same incidents has not got safer. It has got quieter.

Image for illustration purposes only
Year-end workplace safety checklist
Use this as a working agenda. Record an owner and a next step for anything unfinished.
- Review injury, incident and near-miss reports for repeated tasks, locations, shifts or conditions.
- Check whether investigations established underlying causes rather than immediate errors.
- Confirm corrective actions were completed, are still in place, and were tested for effectiveness.
- Check that section 51, 52 and 53 notices were given on time, to the right recipients, for every reportable event in the year, remembering that the section 53 exception removes only the notice to the Director.
- Check that the scene was preserved after any death or critical injury, as subsection 51(2) requires.
- Confirm each notice met the content prescribed by O. Reg. 420/21 and has been kept for at least three years.
- Confirm WSIB reporting met the three-day requirement in subsection 21(1) of the WSIA where it applied.
- Verify washroom cleaning records are posted, in or near the washroom or electronically with access explained, and show the two most recent cleanings. On a project, check the separate six-month servicing record as well.
- Confirm the construction AED requirement is met where twenty or more workers are regularly employed and the work is expected to last three months or more, including the prescribed kit, the signage, quarterly inspection, and a trained worker present at all times when work is in progress.
- Revisit hazard assessments where work, staffing, equipment or layout changed, including any new racking, and check that documentation for any pre-start review exemption is on file and accessible.
- Review inspection findings, maintenance requests and overdue repairs against conditions on the floor.
- Check walking surfaces and lighting against sections 11 and 21 of Regulation 851 before winter.
- Compare training and competency records against current duties, and confirm O. Reg. 297/13 records are complete.
- Check committee certification status, including anyone whose Part 2 deadline falls within twelve months of their Part 1.
- Confirm policies and safe work procedures match actual operations.
- Review emergency contacts, evacuation routes and first aid arrangements, including for evening shifts and contractors.
- List unresolved hazards and decide which need immediate controls rather than a place on next year’s list.
- Set a small number of measurable priorities with owners and follow-up dates.
When to seek professional health and safety support
Outside support is worth it when the same incident keeps happening, when an investigation cannot establish contributing causes, or when a business needs an independent view across several sites. A consultant can review assessments, procedures and corrective-action systems while management retains responsibility for workplace decisions and legal duties.
Describe the actual problem before choosing a service. An investigation reviewed, an inspection process improved, or help turning findings into an action plan are three different scopes, and one set from a clear problem costs less than one set from a general concern.
PHASCORP provides health and safety consulting and on-site and multi-site safety support across Canadian provinces, including programme reviews for employers operating in more than one jurisdiction. Our consultants work at your workplace, with your equipment and your people.
Final thoughts
The value of a year-end review is in what changes afterwards. Pick the recurring hazards that matter most, deal with the urgent ones without waiting for the review to finish, and give someone responsibility for checking whether each improvement held. Keep workers involved so the plan reflects the jobs they actually do.
Get a quote for a year-end programme review. Book a call with PHASCORP to discuss incident reviews, hazard assessments and multi-site support for the year ahead.
Frequently asked questions
Why should an organisation run a year-end workplace safety review?
Because it is the one point in the year when incident trends, inspection findings, training records and unfinished actions can be read together. The output should be a short, prioritised improvement plan with owners and dates, not a completed annual file.
What should a year-end safety review include?
Incidents and near misses, hazard assessments, inspection and maintenance records, training and competency records, safe work procedures, emergency arrangements, and any reporting obligations that arose during the year. Add the operational changes that happened, because those are what invalidated the assessments.
What are the OHSA reporting deadlines for a workplace incident?
They differ by severity. Section 51 requires immediate notice where any person is killed or critically injured, by telephone or other direct means, to an inspector, the committee or representative, and the union, followed by a written report to a Director within 48 hours, and the scene must not be disturbed. Section 52 requires written notice within four days where someone needs medical attention or cannot do their usual work, and within four days for an occupational illness, including for former workers. Section 53 requires written notice within two days for specified occurrences, and its exception removes only the notice to the Director, not the notice to the committee, representative and union.
Is WSIB reporting the same as OHSA notice?
No. They are separate duties with separate deadlines and recipients. Subsection 21(1) of the WSIA requires notice within three days of learning of an accident that necessitates health care or results in the worker not being able to earn full wages, which the WSIB administers as three business days. Meeting it does not satisfy the OHSA notice requirements in Part VII.
What changed under the OHSA in 2026?
Four things, and three are narrower than they are usually reported. Washroom cleaning records became mandatory on 1 January 2026 and must be posted, not merely kept. CPO-accredited safety management systems became equivalent to each other for public-sector procurement of construction work, which is not the same as being equivalent to OHSA compliance. Construction projects with twenty or more workers regularly employed need an on-site AED unless the work is expected to last less than three months. And the administrative monetary penalty framework came into force carrying exactly one penalty-eligible contravention, aimed at public-sector buyers rather than at employers generally.
How often should hazard assessments be reviewed?
Whenever tasks, equipment, staffing, layout or conditions change, and after any event suggesting a control is inadequate. There is no single annual schedule that fits every assessment, so set the interval from risk and operational change rather than from the calendar.
How should an employer review incidents and near misses?
Sort by location, task, shift, equipment and contributing conditions rather than by injury count, then check whether previous corrective actions prevented recurrence. Speak with the workers involved, and treat a single person’s error as a symptom rather than an explanation.
When should a business bring in an outside consultant?
When causes remain unclear after an internal investigation, when incidents recur despite corrective action, or when a programme has to work consistently across several sites. The employer still holds every reporting and safety obligation, so outside support adds capacity and independence, not transfer of duty.